Lauren wants to move into the back bedroom, and Linda took an interest in remodelling the bathroom and bedroom before she does. Linda worked with some people at Materials Marketing which sells lots of different types of stone tile and pieces. They laid out a design for using their stone work to tile the sink counter top, the floor, and the bathtub/shower areas of the bath.
The material for all this was $1983.08. We then contracted with Fox Tile to take out the old tile and install all the new stone tile. This was $2000.
The installation was not as good as I would have preferred. The tile was supposed to go all the way to the ceiling, but they stopped about 8 inches from the top.
And once the tile was in place, we replaced all the fixtures in the room.
The toilet was replaced by an American Standard Champion. This is a higher toilet than normal (they call it "Right Height"), an elongated bowl, in a "Linen" color. $477.38 from Home Depot.
The tub/shower fixtures were American Standard 8630 in Nickel Satin finish $415.50 from Home Depot. I needed help from Fox Services to install the tub/shower fixtures. $85.00
The sink fixtures were "Iris", again in a Nickel Satin finish $402.00 from Home Depot.
The light fixture was from Texas Light, $162.55.
The towel rods were from Restoration Hardware, their Chatham line, again in Satin Nickel. $132.07.
The builder had installed a ceiling heater, but no vent fan, so I took out the ceiling heater and put in a Broan Model 683C Deluxe Fan. This required installing a vent in the exterior gable wall and running a vent duct thru the attic.
And finally, we painted the walls and ceiling. The ceiling is a Premium Plus Interior Eggshell paint, a pastel base with "Restful" (400F-4) tint. The walls are a green Behr paint.
And once the bathroom was done, we repainted the back bedroom. We removed the original "popcorn" ceiling, and textured it to match the walls. $550.00. Then I sanded the wood floors and put a coat of polyurethane on them.
No comments:
Post a Comment